FRUN
Kitagawa's FRUN series lances are suitable for all standard applications, featuring a fully sealed body for better protection from coolant and fine chips. The chuck diameter offered by this series ranges from 6mm to 350mm and can be applicable on both inclined and flat bed lathes. Mounting brackets are available to suit customer requirements.
FRU
Kitagawa's FRU series lunettes are suitable for all standard applications. They offer chucking diameters from 4mm to 1100mm and can be used on both inclined and flat bed lathes. Mounting brackets are available to suit customer requirements.
Catalogue
FRUA
FRUA series lunettes feature a rare mounted actuating cylinder and arm with additional bore perimeter. The FRUAs are made for applications where vertical loading is used, i.e. on machines using automatic loading and workpiece removal.
Catalogue
FRUB
The FRUB series of lunettes are made for machines where the rear mounted cylinder may contact sheet material or other machine enclosures. For this purpose, the drive cylinder is side-mounted on the lunette.
Catalogue
FRUAB
The FRUAB series lunettes feature a side-mounted actuating cylinder with an additional bore on the upper arm.
Catalogue
KRHS
The KRHS series of lunettes is designed for machining crankshafts. Their application range is wide and covers the machining of shafts from the automotive, railway and marine industries.
Catalogue
KRSHS
The KRSHS series of lunettes is designed for the machining of crankshafts and has a side mounted actuating cylinder.
Catalogue
VLHS
The VLHS series of lunettes feature a top open arm, making them suitable for vertical workpiece loading.
Catalogue
EN
The CS series of lunettes is compact in size but can exert pressures from 8 to 80bar.
Catalogue
HL
The HL series of lunettes is designed for lifting very heavy components, namely between 10 and 40 tonnes. The lower arm has additional hydraulic support.
Catalogue
